Make sure that waste materials don’t stick out from the sides of the skip. This can pose a potential hazard for road users or pedestrians.
An enclosed skip is the safest available skip because it will stop contents falling out and prevent dust flying up when waste is put into the skip.
Be aware that skip hire may require a skip hire permit which will cost money and takes time to organize.
Large Skips: Capacity, 12-14 cu yards or 9.2 - 10.7 cu meters. Height, 5'3” or 1.6 meters. Length, 13'8” or 4.2 meters. Width 6’ or 1.84 meters.
For safety reasons it’s always safer to place skips on the road instead of the pavement.
Midi Skips: Small, convenient and suitable for small low volume waste projects.
Your local council will be able to provide you with information on the placing of skips and permits.
If your skip isn’t filled and its contents aren’t stable, cover with dampened or netting to prevent inside waste materials from blowing out.
Builders Skips: Capacity, 6-8 cu yards or 4.6 - 6.1 cu meters. Height, 4' or 1.22 meters. Length, 12' or 3.66 meters. Width 5'6” or 1.68 meters.
Usually the vehicle delivering the skip to your house will be a LGV and are normally very large. Make sure there is enough room to allow it in and out safely.