Plastering is an acquired skill and is best left to those with the acquired knowledge and experience.
Plastering equipment will usually need replacing if plaster is not cleaned off with water before it dries and this can get expensive and is wasteful.
As soon as you have mixed the plaster you should empty it out of the bucket onto a wet board which should be lifted off the ground high enough to enable you to get your plaster onto your hand board (hawk) easily.
External rendering should be started on the shady side of the building to keep it unexposed to the sun as long as possible.
The City Guilds has an entire training centre called Able Skills, where plastering is the main subject taught. There is a course to suit each person's needs, whether you are a beginner or coming in to learn some advanced technology of plastering.
The lime that is mainly used for internal plastering is calcined from chalk, oyster shells or other nearly pure limestone. It is also known as fat, pure, chalk or rich line.
Fibrous plastering is the creation of ornamental plasterwork such as ornamental columns, cornices, ceiling roses and architraves.
The material used for the Plastering Float is high impact polystyrene. This makes it suitable for heavy duty work.
Venetian plastering is being used in many homes as well as famous fashion houses such as Louis Vuitton and Gucci.
Artex can be plastered over quite easily with a little bit of plastering skill and DIY know-how. This article will talk you through the important point to consider when plastering over artex.